Jung Process Systems GmbH
Auweg 2 · 25495 Kummerfeld
Tel. +49 4101 7958-140 · Fax +49 4101 7958-142
info@jung-process-systems.de · www.jung-process-systems.de

Twin-screw pumps

Twin-screw pumps

Twin-screw pumps from the HYGHSPIN series are the perfect solutions for countless applications

Innovative and hygienic design, highly economical, optimum MTTR value – main reasons for HYGHSPIN.

The HYGHSPIN stainless steel pump series from Jung Process Systems have been proved worldwide and can be used for flowable products with practically all viscosities and consistencies – whether aqueous, highly viscous, lumpy, fibrous, or gas-laden.

You have questions?
We will be happy to advise you.

+49 4101 80409-0

Herausforderung: Entgasen von Säften mit Fasern und Pulpen in der Getränkeindustrie

Henning Grönwoldt-Hesse

Twin-screw HYGHSPIN pumps – the most efficient solution for flowable products

Gentle product handling plus CIP with just one pump

The HYGHSPIN is the basic version of the worldwide proven HYGHSPIN pump series made of high-grade stainless steel. Whether aqueous, highly viscous, lumpy, fibrous, or gas-laden – the HYGHSPIN is suitable for flowable products of practically any consistency, and features utmost efficiency. These extremely service-friendly twin-screw pumps convince with a very high suction capacity, and gently transports all flowable products in quantities up to 300 m3/h. An additional pump for CIP cleaning is not necessary. This ensures considerable time and cost savings, thanks to lower outlay for investment and maintenance.

The HYGHSPIN stands for utmost flexibility, and is available in modular design or with a free shaft end.

It is available in sizes of 50, 70, 90, 105 and 125. Max. pumping volume is about 300 m³/h. Pumping pressure is up to 35 bar.



Swipe right or left to examine the elements Tap the blue dots to examine the elements
Advantages at a glance
  • Considerable cost savings
    Reduced investment and maintenance costs
  • Best quality
    Made completely of stainless steel
  • Exceptional service-friendliness
    The pump must not be removed from the plant for maintenance work
  • Utmost flexibility
    A wide range of products, viscosities, and quantities can be handled with a single pump
  • Pumping is gentle and smooth
    Low speed, minimum pulsation, no pressure surges
  • Highest hygiene level
    No dead spaces, and particularly good flushing of the shaft seal
  • CIP and SIP
    Cleaning and sterilisation within the plant, use as CIP feed pump
Technical data / performance features







Max. capacity

20 m³/h

40 m³/h

100 m³/h

180 m³/h

300 m³/h

Max. delivery pressure

20 bar

25 bar

30 bar

20 bar

35 bar

Max. ø of solids

16 (25) mm

20 (30) mm

28 (45) mm

35 mm

45 (67) mm

Suction capacity

NPSHr >0.5 m, suction heights up to 9 m possible


0.5 to 1 000 000 mPa·s, higher values after consultation

Pumping temperature

-10 to 180 °C, higher values on request


full CIP cleaning in the plant


SIP in the plant with steam or hot water

Product-wetted parts

Choice of 1.4404, 1.4539, or 1.4462 – other materials on request


HNBR, FPM, EPDM, FFPM, FDA approval, other elastomers on request

Shaft seals

Single and double-acting floating ring seals, with knife edge for sticky media to prevent start-up damage, single-acting, dry-run safe lip seal

Pump orientation

horizontal, vertical, or sideways (INLINE versions possible)


Different sizes and connecting standards after agreement


Compact, robust modular design for all versions, with free shaft end for sizes 70, 90, 105 and 125


Three-phase, gear, or servo-motors (hygienic stainless steel drives as an option)


©JUNG PROCESS SYSTEMS GmbH 2024    Data Protection   Disclaimer