hygienic · gentle · economical

Jung Process Systems GmbH
Auweg 2 · 25495 Kummerfeld
Tel. +49 4101 7958-140 · Fax +49 4101 7958-142
info@jung-process-systems.de · www.jung-process-systems.de

Twin screw pump HYGHSPIN Hopper - the efficient solution for non-flow capable products

 hygienic, gentle, economically.

The HYGHSPIN Hopper is an extension to the worldwide tried and tested HYGHSPIN series made of stainless steel. The innovative twin screw pump with a funnel opening is able to easily transport products with viscosities of up to 1000 Pas. Its conveyor screws are extended so that they can induct non-flow capable products below the inlet funnel like an extruder and then feed them into the pump chamber. This ensures a particularly gentle handling - an external extruder can be completely dispensed with.

The HYGHSPIN Hopper therefore provides a very attractive 3-in-1 solution: Feeding, conveying and cleaning take place in only one component. It is available in block design or with free shaft end.

The HYGHSPIN Hopper is available in sizes 70, 90 and 125. The maximum conveying rate is approximately 20 m³/h. In the standard version, the differential pressure is a maximum of 10 bar. Optionally, up to 25 bar is possible.

 

Swipe right or left to examine the elements Tap the blue dots to examine the elements
The advantages at a glance
  • Self-guiding design
    By utilising extended feed screws with extrusion function and an enlarged inlet
  • Particularly gentle for sensitive solid materials
    The product falls under gravity into the conveying chamber
  • Particularly suitable for boiling media
    Minimises inlet losses, ensures maximum protection against cavities

In addition there are the advantages from all HYGHSPIN twin screw pumps

  • Considerable cost savings
    Reduced investment, maintenance and service costs
  • Best quality
    Manufactured completely from stainless steel
  • Exceptionally easy to service
    The pump does not have to be removed from the system for service and maintenance works
  • Highest flexibility
    Various products, viscosities and volumes are conveyable with just one pump
  • Gentle to products and uniform conveying
    Lower speed, minimum pulsation, no pressure impact
  • Highest hygiene level
    No cavities and Particularly good rinsing for the shaft seal
  • CIP and SIP:
    Cleaning and sterilisation within the system, application as CIP-Conveying pump
Technical Data / Capability characteristics
Type HYGHSPIN 70H HYGHSPIN 90H HYGHSPIN 125H
Max. pump capacity 10 m3/h 25 m3/h 70 m3/h
Max. differential pressure 20 bar 25 bar 25 bar
Maximum ø solid material 20 mm 30 mm 45 mm
Suction capability
NPSHr > 0.5 m, suction heights of up to 9 m are possible


Viscosity 0.5–1,000,000 mPas, higher values on consultation
Operation temperature –10 to 180° C, higher values on request
Cleaning fully CIP-capable (cleaning in place) in the system
SterilisationSIP in the system with steam or hot water
Wetted parts1.4404, 1.4539 or 1.4462 as an option, other materials on request
ElastomersHNBR, FPM, EPDM, FFPM, FDA-approvals, other elastomers on request
Shaft sealssingle- and double-acting mechanical seals, with knife edge for adhesive media to avoid start up damage, single-acting safe-to-run dry lip seals
Pump orientationhorizontal, vertical or lateral, INLINE models are possible
Connectionsdifferent sizes and connector standards by arrangement
Designscompact robust block design for all sizes, with bare shaft for sizes 70, 90 and 125
Drivesthree-phase, gear or servo motors, hygienic drives in stainless steel as an option

 

Performance data depending on the pump configuration, temperatures depending on speed, pressure and choice of elastomers

Gallery
Downloads
Do you have any questions?
We will be pleased to answer them.

Do you have any questions?
We will be pleased to answer them.

+49 4101 7958-140

sales[at]jung-process-systems.de

Contact Form

Twin Screw Pump

Jung Process Systems: The Film

Jung Process Systems: The Film

Comparison: CIP cleaning

Comparison: CIP cleaning

Comparison: Product handling

Jung Process Systems: The Film

Certificate

Internationally certified according to
EHEDG, 3-A (USA) and Atex.

   Data Protection   Disclaimer © JUNG PROCESS SYSTEMS GmbH