hygienic · gentle · economical

Jung Process Systems GmbH
Auweg 2 · 25495 Kummerfeld
Tel. +49 4101 7958-140 · Fax +49 4101 7958-142
info@jung-process-systems.de · www.jung-process-systems.de

Twin screw pump HYGHSPIN Extended - the smart choice for low pressure applications

Large conveying volumes or solids with compact dimensions.

The HYGHSPIN Extended is a variant of the worldwide tried and tested HYGHSPIN pump series made of high-quality stainless steel. The special focus for the HYGHSPIN Extended is on applications in the low pressure range of up to 6 bar differential pressure.

The feed screws and the pump housing are extended. The HYGHSPIN Extended therefore expands the application possibilities for the individual sizes for higher volume flow rates or very large solids.

The HYGHSPIN Extended stands for high performance with compact dimensions. It is available in block design or with free shaft end.

The HYGHSPIN Extended is available in sizes 70, 90 and 125. The maximum conveying capacity is approx. 350 m³/h. The delivery pressure can be up to 6 bar.

 

Swipe right or left to examine the elements Tap the blue dots to examine the elements
The advantages at a glance
  • Compact construction design, cost savings
    The high power density reduces the space requirement and investment costs
  • Maximum care for lumpy products
    The extended screws enable the conveying of larger solid materials

The advantages of all the HYGHSPIN twin screw pumps are also included

  • Considerable cost savings
    Reduced investment, maintenance and service costs
  • Top quality
    Manufactured completely of stainless steel
  • Exceptionally easy to service
    The pump does not have to be removed from the system for service and maintenance works
  • Highest flexibility
    Various products, viscosities and volumes can be conveyed with just one pump
  • Gentler on the product and uniform conveying:
    Low speed, minimum pulsation, no pressure impact
  • Highest hygiene level
    No cavities and particularly good rinsing for the shaft seal
  • CIP and SIP
    Cleaning and sterilising within the system, application as CIP-Conveying pump
Technical Data / Capability characteristics
Type HYGHSPIN 50E HYGHSPIN 70E HYGHSPIN 90E HYGHSPIN 125E
Max. pump capacity 20 m3/h 40 m3/h 100 m3/h 300 m3/h
Max. differential pressure 4 bar 6 bar 6 bar 6 bar
Maximum ø solid material 16 mm 30 mm 45 mm 67 mm
Suction capability
NPSHr > 0.5 m, suction heights of up to 9 m are possible


Viscosity0.5–1,000,000 mPas, higher values on consultation
Operation temperature–10 to 180° C, higher values on request
Cleaningfully CIP-capable (cleaning in place) in the system
SterilisationSIP in the system with steam or hot water
Wetted parts1.4404, 1.4539 or 1.4462 as an option, other materials on request
ElastomersHNBR, FPM, EPDM, FFPM, FDA-approvals, other elastomers on request
Shaft sealssingle- and double-acting mechanical seals, with knife edge for adhesive media to avoid start up damage, single-acting safe-to-run dry lip seals
Pump orientationhorizontal, vertical or lateral, INLINE models are possible
Connectionsdifferent sizes and connector standards by arrangement
Designscompact robust block design for all sizes, with bare shaft for sizes 70, 90 and 125
Drivesthree-phase, gear or servo motors, hygienic drives in stainless steel as an option

 

Performance data depending on the pump configuration, temperatures depending on speed, pressure and choice of elastomers

Gallery
Downloads
Do you have any questions?
We will be pleased to answer them.

Do you have any questions?
We will be pleased to answer them.

+49 4101 7958-140

sales[at]jung-process-systems.de

Contact Form

Twin Screw Pump

Jung Process Systems: The Film

Jung Process Systems: The Film

Comparison: CIP cleaning

Comparison: CIP cleaning

Comparison: Product handling

Jung Process Systems: The Film

Certificate

Internationally certified according to
EHEDG, 3-A (USA) and Atex.

   Data Protection   Disclaimer © JUNG PROCESS SYSTEMS GmbH